Need help?Do you have a question about the ESAB Buddy Feed 402 and is the answer not in the manual?
General| Input Voltage | 230 V |
|---|---|
| Input Current | 16 A |
| Number of Phases | 1 |
| Frequency | 50/60 Hz |
| Wire Diameter | 0.6 - 1.0 mm |
| Max. Spool Diameter | 300 mm |
| Enclosure Class | IP23 |
Recommended personal safety equipment for welding operations, including protective gear.
Essential safety measures for the welding environment and operator practices.
Covers risks of electric shock, hazardous fumes, and eye/skin damage from arc rays.
Addresses fire hazards, hearing protection needs, and procedures for equipment malfunctions.
Lists the items supplied with the Feed 402 wire feed unit upon purchase.
Identifies and explains the various connections and control elements on the wire feed unit.
Details how to set and check the correct wire feed pressure for optimal performance.
Explains the operation of the wire inching feature for feeding wire without welding.
Provides step-by-step instructions for safely replacing and inserting welding wire.
Guides on how to change the feed rollers, including details on track selection.
Details checks for dirt, cleaning, and replacement of worn parts in the wire feed unit.
Explains how to adjust the brake hub for correct wire tension and braking torque.
Covers cleaning and replacement of wear parts for the welding gun and contact tip.
To Next Page