1 SAFETY
Users of ESAB welding equipment have the ultimate responsibility for ensuring that anyone who
works on or near the equipment observes all the relevant safety precautions. Safety precautions
must meet the requirements that apply to this type of welding equipment. The following
recommendations should be observed in addition to the standard regulations that apply to the
workplace.
All work must be carried out by trained personnel well-acquainted with the operation of the welding
equipment. Incorrect operation of the equipment may lead to hazardous situations which can result
in injury to the operator and damage to the equipment.
1. Anyone who uses the welding equipment must be familiar with:
●
its operation
●
location of emergency stops
●
its function
●
relevant safety precautions
●
welding
2. The operator must ensure that:
●
no unauthorized person is stationed within the working area of the equipment when it is
started up.
●
no-one is unprotected when the arc is struck
3. The workplace must:
●
be suitable for the purpose
●
be free from drafts
4. Personal safety equipment
●
Always wear recommended personal safety equipment, such as safety glasses, flame-
proof clothing, safety gloves.
●
Do not wear loose--fitting items, such as scarves, bracelets, rings, etc., which could
become trapped or cause burns.
5. General precautions
●
Make sure the return cable is connected securely.
●
Work on high voltage equipment may only be carried out by qualified electricians.
●
Appropriate fire extinguishing equipment must be clearly marked and close at hand.
●
Lubrication and maintenance must not be carried out on the equipment during operation.
To Next Page
Loading...
