Escali Velo User Manual

Escali
®
Measuring What’s Next
TM
Model: Velo, Travel Scale
Thank you for purchasing an Escali Digital Scale
Please read the following operation information to ensure the proper function of
your new scale.
I. Before using your Travel scale:
Open the battery door at the back of the scale by using the hook.
Remove the insulating plastic strip from the battery and ensure the +/- terminals
are correctly placed as shown inside the battery compartment. This scale
operates on 1
- CR2032 lithium battery (included).
II. Select unit before use:
Press the “ ” key to turn the scale on. Immediately press the “ ” key again to
change the scale to the measuring unit of your choice (Lbs, Kg or St). When
selected please wait 2 seconds for the scale to calibrate, your scale will go to
weighing mode and will show zero on the display.
III. Weighing your luggage:
Press the “ ” key to turn the scale on. Your scale will calibrate and goes to
weighing mode (zero wil
l show on the display).
Strap the handle on your luggage and lift your travel scale up.

Escali Velo Specifications

General

Brand	Escali
Model	Velo
Category	Scales
Language	English

Summary

Getting Started with Your Escali Travel Scale

Battery Installation Guide

Properly open the battery door and insert the CR2032 battery with correct terminal placement.

Unit Selection Procedure

Turn on the scale and select your preferred unit (Lbs, Kg, St) for measurement.

How to Weigh Luggage

Calibrate the scale, zero it, and lift luggage using the strap for accurate weight reading.

Important Usage and Safety Information

Overweight Item Warning

Avoid weighing items exceeding capacity to prevent 'EEEE' error and potential damage.

Battery Replacement

Replace batteries promptly when the low battery symbol appears on the display.

General Care and Precautions

Handle with care, avoid moisture, disassembly, and electromagnetic interference for accurate readings.

Scale Specifications

Technical Details

Key specifications including capacity, increments, weight modes, auto shut off, and power source.