To Next PageTo Next Page
Need help?Do you have a question about the ESCAM Cat QF300 and is the answer not in the manual?
General| Resolution | 1080P (1920 x 1080) |
|---|---|
| Lens | 3.6mm |
| Viewing Angle | 90° |
| Video Compression | H.264 |
| Frame Rate | 25fps |
| Audio | Two-way audio |
| Wireless | WiFi 802.11 b/g/n |
| Operating Temperature | -10°C to 50°C |
| Weather Resistance | IP66 |
| Storage | Micro SD card (up to 128GB) |
| Pan/Tilt | No |
| Sensor | 1/2.7" CMOS Sensor |
| Night Vision | Yes (IR LEDs) |
| Network | RJ-45 Ethernet port |
| Power Supply | DC 12V |
| IR Distance | 20m |
Details on RJ45 network cable interface, power and network signal indicators, and essential power adapter warning.
Guide to downloading the P2PWIFICAM app, scanning QR code, and viewing the IP camera feed.
Ensures mobile phone and IP camera are on the same local network for initial viewing.
Steps to begin the mobile WiFi setup process by clicking the 'i' icon.
Selecting WiFi settings, choosing a network, entering the password, and applying changes.
Locating the IP camera's address via software and accessing it through a web browser.
Instructions for previewing the camera feed using Internet Explorer and installing necessary ActiveX controls.
Configuring wireless network settings for the IP camera using the Internet Explorer interface.
Adding and viewing IP cameras using the Central Management System (CMS) software.
Connecting the IP camera to WiFi networks using the CMS software interface.
