Escea DF960 - Trouble Shooting; E2 Errors; E1 or E3 Errors

10

H TRIM/FASCIA AND GLASS CARE
H1 Powder-coated Trim Care
The Trim is the visible surround of your Escea Gas Fireplace and must be treated carefully to prevent unsightly
marks from tarnishing the visual quality of the product.
ͳ Ensure that the Gas Fireplace is o and that the trims are cold to the touch.
ͳ Gently clean the trims with a non-abrasive cloth and warm soapy water.
ͳ Wipe dry with an absorbent microbre cloth.
H2 Glass Care
WARNING: DO NOT ATTEMPT TO CLEAN THE GLASS WHILE IT IS HOT. ALL INTERNAL GLASS/PARTS OF
THE FIREPLACE MUST BE SERVICED BY AN AUTHORISED TECHNICIAN.
Clean the outside of the glass with normal glass cleaning products and a clean dry cloth. Stubborn marks may
be cleaned with a ceramic glass cleaner.
I TROUBLE SHOOTING
This gas re has been designed to show error codes to help explain and idenfy any fault situaon that
occurs. These codes will appear on the wireless remote control. Codes can always be cleared from the
remote, or hidden by pushing the OK buon. Hit the warning symbol to un-hide the error and clear.
For E2 Errors, try the following:
ͳ Make sure you have gas by checking other gas appliances.
ͳ If you use two LPG cylinders, switch to the full one or contact your gas supplier.
ͳ Try igning the re a few mes aer restoring gas supply.
For E1 or E3 Errors, try the following:
ͳ Check the re for any obstrucons.