Escea IB600 User Manual (English)

Other manuals for Escea IB600

Questions and Answers:

H
Haley WatersAug 1, 2025
What to do if my Escea IB600 Indoor Fireplace has flame failure?
- A
  anna09Aug 1, 2025
  If your Escea Indoor Fireplace experiences flame failure, first check your gas supply and other gas appliances to ensure they are working correctly. If you have two separate LPG cylinders, switch to the full one. A significant reduction in air pressure inside the house might also be the cause. Try opening a nearby window or door to see if it improves. If the issue persists, it may indicate a problem with the PFU installation, potentially causing an E2 Error if exhaust flow is disrupted.
D
Dalton ShepardAug 9, 2025
How to fix 'Electronics overtemp' error on Escea IB600?
- L
  Lindsey WilliamsAug 9, 2025
  The 'Electronics overtemp' error in your Escea Indoor Fireplace indicates overheating of the electronics. This is often due to a four-sided fascia being mounted too high, which results in an insufficient air gap between the lower removable strip and the bottom of the outer fascia. To resolve this, reset the unit by turning the power off at the wall, waiting 10 minutes, and then turning it back on.
W
William Dudley DDSAug 19, 2025
What to do if my Escea IB600 Indoor Fireplace shows OR Draught Diverter Spill Switch error?
- T
  Tina BrennanAug 19, 2025
  If your Escea Indoor Fireplace displays an OR Draught Diverter Spill Switch error, it means the flue is not drawing properly. This can happen because a gust of wind is pushing exhaust gases back down the flue or a significant reduction in air pressure inside the house is pulling exhaust gases back down the flue. Adding some ventilation to the living space might help. Also, check that the fans are running normally after resetting the fire. If none of these things can be identified, contact your local installation company to check the flue installation.