If the fire is operated with finger (and other) marks present on
the fascia panels there is a risk of them being burnt into the
fascia paintwork as the fire gets hot from normal running.
The fascia panels should be kept as clean as possible and all
cleaning should be carried out when the fire is off and cold.
NEVER, EVER RUB THE FASCIA
The outside of the fascias must only be cleaned with a damp
cloth. The high temperature silver powder coating that is used
on Escea fascia parts contains certain amounts of aluminium
that when rubbed too hard will oxidise leaving a big black
smudge that cannot be removed.
The glass can be cleaned, inside and out, using most domestic
glass cleaners providing that all residue is removed with a
CLEAN and DRY cloth. Stubborn marks can be cleaned using a
ceramic cook top cleaner.
Cleaning maintenance will need to be carried out whenever
soot builds up on the logs and/or inside of the glass.
If soot build up becomes excessive or regular, then it is
recommended that you contact an authorised Gas Fitter to
service your fire.
Fascia, Log and Glass Care
13
To Next Page
Loading...
