Smells
The first few times the unit is operated after installation, the unit
may release an odour and the flames will appear orange caused
by the curing of the paint, the burning off of the starch in the
ceramic logs and the oils in the metal. This is a temporary curing
process which will disappear with use.
A deposit on the inside of the glass, caused by the starch in the
logs may appear as a build up after several uses. If this film is not
removed, it will bake on and may become difficult to remove.
When the glass is cold, remove it (see page 10) and clean the inside
with a non-abrasive cleaner.
WARNING
DO NOT ATTEMPT TO CLEAN THE GLASS WHILE IT IS HOT. NEVER
OPERATE THE UNIT WITH THE GLASS REMOVED.
.
.
.
. .
Sound & Smell
12
To Next Page
Loading...
