Settings & Preferences
Tones Standard* Standard alert tones
Standard+ Standard alert tones for primary alert and
double-beep tones for additional alerts
Mild Mild doorbell chime alert tones
AutoMute Low / Med* / High / O Automatically reduces audio to preferred volume during alert
AutoLearn On* / O Automatically stores and locks out false alarms
Units English* / Metric Units for distance and speed
Language English* / Espanol Language for voice and text
Voice On* / O Voice announcements
GPS Filter On* / O Enables GPS-powered features
AutoPower O Power turns on or o depending on your vehicle’s ignition
type (constant power or switched)
1 Hour Powers o automatically after 1 hour
2 Hours Powers o automatically after 2 hours
4 Hours* Powers o automatically after 4 hours
8 Hours Powers o automatically after 8 hours
NOTE: If AutoPower is on, to save screen life the display screen goes blank after 30 minutes
without moving. Display screen will turn on automatically after you reach 10MPH.
Band Enables Default* Default Settings
Modied Band Enables have been modied from their default settings
Press BRT to go from one Press VOLUME + or – to change
Band category to the next your setting within a category
X Band On* / O
K Band On* / O Freq: 24.050 – 24.250 GHz
NOTE: When K Band is o, you can select separate segments of the band to turn on or o.
KN1 On* / O Freq: 24.050 - 24.110 GHz
KN2 On* / O Freq: 24.110 - 24.175 GHz
KN3 On* / O Freq: 24.175 - 24.250 GHz
KN4 On / O* Freq: 23.950 - 24.050 GHz
Ka Band On* / O Freq: 33.400-36.000 GHz
NOTE: When Ka Band is o, you can select separate segments of the band to turn on or o.
KaN1 On / O* Freq: 33.400 - 33.700 GHz KaN6 On / O* Freq: 34.800 - 35.160 GHz
KaN2 On / O* Freq: 33.700 - 33.900 GHz KaN7 On / O* Freq: 35.160 - 35.400 GHz
KaN3 On* / O Freq: 33.900 - 34.200 GHz KaN8 On* / O Freq: 35.400 - 35.600 GHz
KaN4 On* / O Freq: 34.200 - 34.600 GHz KaN9 On / O* Freq: 35.600 - 35.840 GHz
KaN5 On */ O Freq: 34.600 - 34.800 GHz KaN10 On / O* Freq: 35.840 - 36.000 GHz
Ka-POP On / O*
Laser On* / O
TSR On* / O Automatically rejects trac ow sensors-monitoring false alarms
Marker Enables Default* Default Settings
Modied Marker Enables have been modied from their default settings
NOTE: AutoPower only works with
constant power ignition.
8