Escort max 360c - Software Updates

Settings & Preferences
9
Notes for Settings & Preferences
For descriptions of features and functions available when connected to ESCORT Live, visit EscortRadar.
com and download the MAX 360c Owner’s Manual.
To view serial number and software revision press MRK and MUTE while powering on detector.
To restore MAX 360c to its original factory Settings, press and hold MRK and BRT while turning the power
on. A “Restored” message will display, acknowledging the reset.
Software Updates
In its factory default settings MAX 360c automatically receives software updates from your connected
vehicle’s Wi-Fi network. See Using Wi-Fi Connect on page 6 for connection instructions.
The MAX 360c operating rmware and red light and speed camera database can also be updated using a
USB A/Mini B cable (not included) connected to a computer using our detector software tools found on
our web site. In order to have access to these updates, please register your MAX 360c at www.
EscortRadar.com
Warranty
Press BRT to go from one Press VOLUME + or – to change
Marker category to the next your setting within a category
Other On* /O Other location
Redlight On* / O Red light camera
Red & Speed On* / O Red light & speed camera
Speed Cam On* / O Speed camera
Speed Trp On* / O Speed trap
Air Patrol On / O* Known aircraft patroled areas
NOTE: User cannot mark an air patrol location.
Clear Locations Marked Clear all user Marked locations. Press MUTE button to conrm
Lockouts Clear all lockouts. Press MUTE button to conrm
Defender Clear all DEFENDER data. Press MUTE button to conrm
Format Clear DEFENDER database, all markers, and all lockouts
Press MUTE button to conrm
Wi-Fi On* /O Turns Wi-Fi Connect on or o
Bluetooth On* / O Turns Bluetooth on or o
Auto Update O/Defender/ Automatically checks for selected updates when detector is powered on
Software/All*
Perform Update Defender Perform Defender update. Press MUTE to conrm
Software Perform Software update. Press MUTE to conrm
*Default Setting