Need help?Do you have a question about the Eskimo WIDE1 INFERNO and is the answer not in the manual?
Overview of the Eskimo ice shelter and its quality, emphasizing durability and customer appreciation.
Instructions for warranty registration, contacting customer service, and recording ownership details for support.
Discusses fabric flame resistance, fuel-based heat sources, carbon monoxide risks, and ventilation needs.
Covers open flames, unattended use, anchoring, smoking, and storage of flammable liquids.
Detailed list of shelter components with reference numbers, descriptions, and quantities.
Visual guide for identifying different types of bolts used in assembly, noting extra hardware may be included.
Lists required tools, provides assembly tips, and details the first two assembly steps for the sled base.
Continues assembly with seat rails, braces, support, swivel, and seat attachment to the sled.
Details attaching frame uprights, pole caps, and extension arms to the shelter frame components.
Instructions for draping the shelter skin, attaching retainers, and basic set-up/take-down procedures.
Guides on pulling the shelter skin taut and securing the edge trim to the sled lip with screws.
Instructions for adding a tow rope and installing the gear net for organization.
Explains shelter setup/takedown variations and proper long-term storage procedures to prevent damage.
General| Brand | Eskimo |
|---|---|
| Model | WIDE1 INFERNO |
| Capacity | 1 Person |
| Set-Up | Pop-Up |
| Ice Anchor Qty | 6 |
| Doors | 1 |
| Fabric | 300 Denier Insulated |
| Floor Material | 600D Polyester |
| Floor Water Resistance | 3000mm |
| Poles Material | Fiberglass |
To Next Page
