Do you have a question about the Eskimo Eskape 2000 and is the answer not in the manual?
Section to record purchase details and serial number for warranty.
Key safety guidelines for using the ice shelter safely regarding flames, heat, and ventilation.
Explains the meaning of WARNING, CAUTION, and IMPORTANT symbols in the manual.
Illustrates and labels the various frame components of the shelter.
Illustrates and labels the components of the bench seat.
Shows and labels the Quick Release System (QRS) assemblies.
Visual guide to identify bolts, screws, and nuts used in assembly.
Lists the required tools for assembling the ice shelter.
Essential advice for a smooth and efficient assembly process, including key tips.
Instructions for assembling and attaching the bench seat to the sled.
Diagram showing the breakdown and identification of frame poles.
Instructions for attaching the rear frame pole assembly.
Instructions for attaching the middle frame pole assembly.
Step to flip the bottom pole assembly onto the ground.
Step to extend the bottom pole assembly.
Instructions to flip and extend combined pole assemblies to position.
Instructions to pick up and extend the rear pole assembly.
Figures showing spreader pole and frame pole placement.
Recommendations for achieving a good skin fit and attachment.
Steps for placing the shelter skin over the frame.
Instructions to shorten spreader poles for skin tension.
Tips for preparing the shelter and extending the framework during setup.
Instructions for collapsing, stowing the shelter, and best practices.
Information about optional anchor grommets for securing the skirt.
Tips for wind block position and long term storage.
Overview of customer service, product support, ordering parts, and serial number location.
Details of the one-year limited warranty for the product.
Steps and requirements for obtaining warranty service.
| Seasons | 3-season |
|---|---|
| Setup | Freestanding |
| Capacity | 2 person |
| Peak Height | 42 in (107 cm) |
| Material | Polyester |