17
Operator’s Manual
44100
|
Eskape™ 2000 Flip-Style Sled Shelter
Check for parts online at www.GetEskimo.com or call 800-345-6007
ENGLISHENGLISH
ORDERING REPAIR PARTS
Replacement parts can be obtained through our customer
service. Call, e-mail, or order online at www.GetEskimo.com:
Eskimo Ice Fishing Gear,
A Division of Ardisam, Inc.
1-800-345-6007
E-mail: info@geteskimo.com
Please include the part numbers, part description,
quantity, model number and serial number.
The serial number tag can be found near the bottom front
corner of the shelter skin when setup. Your serial number on
the tag will look similar to the example below:
Serial Number
4321-15507-22
SERVICE, TROUBLESHOOTING, AND REPAIR
Service Information
At Ardisam, we build quality and durability into the
design of our products; but no amount of careful design
by us, and careful maintenance by you, can guarantee
a repair-free life for your unit.
We will always be glad to answer any questions you have,
or help you nd suitable assistance.
LONG TERM STORAGE TIPS
Always make sure your ice shelter is completely dry before
storing for long periods of time. Storing your ice shelter
when damp or wet may cause mold and mildew damage.
• Clean all salt, moisture and debris from your shelter
skin, sled and poles. Wipe down poles with a wet rag.
• Store skin, poles and sled in a cool, dry place away
from rodents.
WIND BLOCK POSITION
The rear (#27730) adjustable spreader pole can be used to
create a partially open shelter position that works well in
blocking “light winds” on otherwise nice shing days.
See Figure below.
NOTE:
Skin assembly not pictured below. Figure shown here to demonstrate
"windbreak mode" pole arrangement only, and may not represent your
specic shelter model.
To Next Page
Loading...
