Eskimo Eskape 2000 - 3.3 Attach Bottom Front Pole Assembly; Section 4: Pole Setup and Spreader Pole Assembly; 4.1 Flip Bottom Pole Assembly; 4.2 Extend Bottom Pole Assembly

12 Check for parts online at www.GetEskimo.com or call 800-345-6007
Operator’s Manual
44100
|
Eskape™ 2000 Flip-Style Sled Shelter
ENGLISHENGLISH
4.1 4.2
4.3
4.54.4
3.3
Attach 42832/42831/42833
bottom front pole assembly
to hinges using:
– (2) Pole Caps (27821)
– (2) 2-½ Inch Pan Head Bolts (67430)
– (2) ¼ Inch Washers (48261B)
– (2) Nylock Nuts (67538B)
NOTE:
Do not overtighten this assembly.
4.1
Flip the 42833/42831/42832 bottom pole
assembly down onto ground.
4.2
Extend the bottom pole assembly from Step 4.1.
There should be an audible “click” when the push
button assembly on the pole lock into place.
SECTION 4 – Pole Setup and Spreader Pole Assembly
42832/42831/42833
ASSEMBLY
#27821
#36618
#48261B
#67538B
#67430