4. Checking the charger indicator
5. You can also check the batte life by pressing the button on the
batte pack. The light will indicate how much juice is left in your
batte.
6. After allowing your bike to fully charge, test to make sure the
LCD display is working. Locate your handlebar controls, then
press and hold the “MODE” button until the LCD screen turns
on. (Repeat this step to turn it o).
7. Familiarize yourself with your LCD screen, so that you can easily
check your current speed, distance traveled, batte life, and
pedal assist levels while riding. Lastly, you need to turn on to
any levels before you can go full-electric (US models).
To Next Page
Loading...