When you rst receive your bike, it’s impoant that you follow
these steps to ensure that your batte cells are properly balanced
in order to optimize batte longevity.
Balancing Your Batte
Do not cover the charger while in use.
Do not open the charger or alter the voltage input.
If there appears to be any issue with the charger or batte,
stop riding and contact us immediately
Charging time takes about 4-5 hours. On rare occasion, it may take
longer to allow the batte to fully charge, paicularly when the
bike is new or has been stored for long period of time.
While the charger is designed to automatically stop charging once
the batte is full, do not leave it plugged in for periods of time
greater than 12 hours.
Make sure your charger avoids contact with liquids, di, and
debris.
The charger may get hot while in use. However if it gets too hot to
touch, or you notice anything such as a strange smell or other
indications that it may possibly be overheating, discontinue use
immediately and contact ESKUTE Bike.
Only charge the batte with the supplied ESKUTE
charger, as others may cause damage to the batte or
increase the possibility of re or explosion.
14
To Next Page
Loading...