Failure to follow proper batte care practices can result in
unnecessa wear to the components, batte, and/or charger,
which could lead to a batte that underpeorms, or becomes
non-functional. Loss of batte capacity is not covered by
warranty.
1. For the rst initial charge upon receiving your bike (or after long
storage time), be sure to charge the batte for at least 8 hours
before riding.
2. After the rst 3 rides, you may begin normal charging proce�
dures.
If you plan on storing your bike (or spare batte) for longer than
two weeks at a time, please be sure to follow these guidelines in
order to maintain the lifespan of your batte.
It is recommended that you do not leave the batte at lower than
an 80% charge when storing for long periods of times. If storing
for a month or longer, periodically check the batte and be sure
to keep the charge up to at least 80%.
Store your batte in a cool, d area away from water and other
elements at a temperature between 50℉ - 77 ℉ (10℃ - 25℃).
Storing Your Batte
Note: We recommend that you let the batte charge for at least 8 hours for
the rst 3 charges to make sure the cells balance properly.
15
To Next Page
Loading...