31
Specifications
General
System . . . . . . . . . . . . . . . . . . . SACD, CD, CD-R and CD-RW
Power supply
U.S.A./Canada model. . . . . . . . . . . . . . . . AC 120 V, 60 Hz
Korea model . . . . . . . . . . . . . . . . . . . . . . AC 220 V, 60 Hz
Europe model . . . . . . . . . . . . . . . . . . . . . AC 230 V, 50 Hz
Power consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 W
Weight
Main Unit . . . . . . . . . . . . . . . . . . . . . . 28 kg (61-11/16 lbs)
Power Supply Unit . . . . . . . . . . . . . . . . . 16 kg (35-1/4 lbs)
External dimensions (W x H x D)
Main Unit . . . . . . . . . . . . . . . . . . . . . 445 x 158 x 420 mm
(17-1/2˝ x 6-1/4˝ x 16-9/16˝)
Power Supply Unit . . . . . . . . . . . . . . . 240 x 158 x 420 mm
(9-7/16˝ x 6-1/4˝ x 16-9/16˝)
Operating temperature. . . . . . . . . . . . . . . . . . . . +5˚C - +35˚C
Operating humidity . . . . . . . . . 5% to 85% (no condensation)
Storage temperature. . . . . . . . . . . . . . . . . . . . . –20˚C - +55˚C
Digital Audio Output
IEEE1394 input/output x 2
XLR output x 1
Use 6 terminals (L, R, C, SW, LS, RS) for ES-LINK output
Use 2 terminals (L, R) for Dual AES output
Use 1 terminal (L/R) for XLR output
RCA coaxial output x 1 (L/R terminal)
RCA coaxial (NORMAL) output x 1
No digital signal is available at the RCA C/SW and LS/RS
output terminals. If no ES-LINK-capable device is connected,
no digital audio is available at the XLR C/SW and LS/RS output
terminals, either.
When updated in the future to be capable of playing back
DVD-Audio, this unit can output multi-channel digital data
from DVD-Audio.
Word Clock
Jack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . BNC x 1
Input level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.5 Vp-p/75Ω
The main unit can accept and synchronize to the following
frequencies received from external devices (rectangular wave):
44.1kHz, 48kHz, 88.2kHz, 96kHz,
100kHz, 176.4kHz, 192kHz,
Input frequency range
IN mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±15ppm
Rb IN mode is designed for external clocks like a rubidium
clock generator.
Accessories
Power cord x 1
DC power cable x 2
Remote Control Unit (RC-985) x 1
Batteries (AA, R6 or SUM-3) x 2
Screwdriver x 1
Felt pad x 8
Warranty card x 1
Owner
’
s manual x 1
• Design and specifications are subject to change without
notice.
• Weight and dimensions are approximate.
• Illustrations may differ slightly from production models.
To Next Page
Loading...
