Espa SPEEDRIVE - General Information; Technical Specifications

- 3 -
1) GENERAL INFORMATION.
1) GENERAL INFORMATION.1) GENERAL INFORMATION.
1) GENERAL INFORMATION.
The Speedrive inverters have been designed to adjust the speed of three
threethree
three-
--
-phase motors
phase motorsphase motors
phase motors used with water pumps.
The inverter receives a signal from the pressure transducer that is proportional to the installation's pressure. This signal
is processed and it regulates the speed of the motor to keep the pressure constant, even though the consumption of
water varies.
It can be used with 50Hz or 60Hz motors. Selecting the output frequency with the menu option.
The units have a constant pressure control system. The PI system used provides two numerical constants that are
processed by the unit to achieve a stable regulation.
This type of regulation can greatly reduce the consumption of energy when compared to unregulated systems,
since the consumption of electricity will be proportional to the consumption of water. Another of the advantages
of regulated units is the decrease in voltage surges, softening current peaks and, therefore, increasing the
working life of the pump.
WARNING: Correct compliance with the installation and operating instructions and the electrical
connection diagrams will guarantee the correct operation of the unit.
DANGER: The failure to follow the instructions in this Manual can lead to motor overloads,
diminishment in technical characteristics, reduction of the unit's working life and all types of
subsequent results, for which we decline any responsibility.
2) TECHNICAL SPECIFICATIONS.
2) TECHNICAL SPECIFICATIONS.2) TECHNICAL SPECIFICATIONS.
2) TECHNICAL SPECIFICATIONS.
2.1) Models.
2.1) Models. 2.1) Models.
2.1) Models.
INPUT
INPUTINPUT
INPUT OUTPUT
OUTPUTOUTPUT
OUTPUT
Dimensions
DimensionsDimensions
Dimensions Weight
WeightWeight
Weight
Model
ModelModel
Model
Speedrive
SpeedriveSpeedrive
Speedrive
Power
Power Power
Power
supply
supplysupply
supply
voltage
voltagevoltage
voltage
Max.
Max. Max.
Max.
rated
rated rated
rated
current
currentcurrent
current
Recommended
Recommended Recommended
Recommended
line
lineline
line
protection
protectionprotection
protection
Max.
Max. Max.
Max.
motor
motor motor
motor
current
currentcurrent
current
Motor
Motor Motor
Motor
voltage
voltagevoltage
voltage
A
AA
A B
BB
B
[V]
[V][V]
[V] [A]
[A][A]
[A] [A]
[A][A]
[A] [A]
[A][A]
[A] [V]
[V][V]
[V] [mm]
[mm][mm]
[mm] [mm]
[mm][mm]
[mm] [kg]
[kg][kg]
[kg]
M2
M2M2
M2
1~ 230V AC
±10%
13.5 20 7
3~ 230V
AC
128 71
2.2
T2
T2T2
T2 7 10 6 2.4
T3
T3T3
T3
3~ 400V AC
±10%
11 15 9
3~ 400V
AC
142 85
2.5
2.2) Dimensions.
2.2) Dimensions. 2.2) Dimensions.
2.2) Dimensions.
2.3) Features.
2.3) Features. 2.3) Features.
2.3) Features.
• Degree of protection: IP55.
• Maximum working ambient temperature: 40 ºC.
• Inputs: 1 analogue 4-20mA, with 24V DC power supply. 1 digital input for the level switch.
• Outputs: Only M..., 1 potential-free contact, maximum current 2A at 250V AC.
• Communications: RS 485 serial port.