CLEANING AND OPERATION
Plastic parts of the baby cot can be cleaned with a soft, damp cloth. Do not use strong
washing agents.
Clean metal parts with a dry cloth, removing dust and water.
The upholstery and mattress of the baby cot may only be hand washed at 30 degrees
using gentle washing agents, best washing liquids.
Check periodically if all elements of the baby cot are operational and safe.
Do not use the baby cot if any element is missing or in case any element is damaged or torn.
NOTE
- Long exposure of the baby cot to sunlight may cause fading of fabrics. Complaints
arising from the above will not be accepted.
- Do not leave the baby cot nearby the sources of heat (heaters, blowers, etc.).
It may cause damage to plastic parts.
- To ensure you are satisfied with the quality our product, BDG PRODUKCJA
reserves the right to make changes in the design of the cot without the obligation
to inform buyers.
- Repairs due to negligence in care for the product will be performed against fee
- BDG PRODUKCJA is not liable for any damage to property or
injuries arising from the assembly and use of the product, including its protective and
securing elements, which is not compliant with instructions and recommendations
of the manufacturer covered by this user manual.
18-19
WARNING
NOTE - In order to avoid the risk of suffocation of the child with the tape fixing
the baby cot to the adult bed, the fixing tape should be always away from the
baby cot.
NOTE - When changing the height of the baby cot, always make sure that
the inclination angle of the base of the baby cot (between the left and right
side of the baby cot) is not greater than 10o, i.e. that the level difference
between the left and right side of the baby cot is less than or equal to "2".
To Next Page
Loading...