3. ENVIRONMENTAL FACTORS
Avoid the following environments for operation or storage.
Where the equipment is exposed to water vapor.
Don't operate an equipment with a wet hand.
Where the equipment is exposed to direct sunlight.
Where the temperature changes extremely.
Normal operating temperature range is from 10°C to 40°C, humidity is from 30% to 75%.
Where it is near the heat equipment.
Where the humidity is extremely high or there is a ventilation problem.
Where the equipment is subject to excessive shocks or vibrations.
Where equipment is exposed to chemical material or explosive gas.
Be careful not to be inserted dust, especially, metal.
Don't disassemble the product or open. The warranty is void.
Be careful not to close the fan located on the lateral or back side of the equipment.
Don't plug the AC power cord into the outlet before the connection between devices of the
equipment is completed.
This can generate the defect.
Pull out the power cord with holding the plug, not the cord.
Avoid areas where the ambient temperature falls below 10°C or exceeds 40°C during normal operation, or
falls below -10°C or exceeds 40°C (14°F-104°F) for transportation and storage. Humidity should be
maintained at between 30% and 75% for normal operation, transportation and storage.
Avoid environments where the equipment is exposed to excessive shocks or vibrations.
To Next Page
Loading...
Need help?
General
