Easy hook up and installation to all manufactured purge and trap systems.
Hot water rinse utilizes a cartridge heater to heat blank water to 90C prior to flushing
sample pathways and the purge vessel.
Optional Dual concentrator mode for both water and soil matrices.
Optional Dual GC mode.
1.3 Product Specifications
Tray Capacity:
100 sample vials. 40 ml EPA VOC
Sample Volume:
5, 10, 15, 20, 25ml sample loop, 5 to 25ml volume
syringe (1ml increments for syringe)
Indoor Use
Altitude:
Up to 2000 m
Operating
Temperature:
15C to 25C; Storage Temperature 5C to 85C
Relative Humidity:
10 to 90%
Voltage:
115/230VAC ( 10%), 50/60Hz
Current:
Model
115VAC 230VAC
Current(A) Current(A)
CenturionW 4.0 2.0
CenturionWS 8.0 5.0
Battery:
Installation Category:
CR2032 battery contained on SBC (CPU) board
II
Pollution Degree:
2
Weight:
Approximately 80 lbs; 36.5 Kilograms
Size:
24.5”W (62.2 cm) x 27”D (68.6 cm) x 25” H (63.5 cm)
Gas Requirements:
Helium or Nitrogen 60-80 PSI (414-552kPa) 99.999%
GC/MS grade purity; BTU/hr. = NA (compressed gas
used for pressurization only)