8
HOW TO INSTALL AN ATTACHMENT
To install an attachment, the bowl must be installed and fully lowered. Place the attachment in the
bowl, push it up on the attachment shaft, and turn it clockwise to seat the shaft pin to the slot of the
attachment shank. Disconnect the power connection before installing the accessories.
• There are 2, #5 hub grinder plates included. One with 3/16" hole diameter and the other with 5/16"
• The pasta roller attachment can roll dough into thicknesses between 1/64" & 3/32"
USING YOUR ESTELLA ATTACHMENTS
Flat Beater
Use to make normal to heavy mixtures:
Cakes, biscuits, creamed frostings, quick breads, candies,
meat loaf, cookies, mashed potatoes, pie pastry
Wire Whip
Use to make mixtures that need to have air incorporated:
Eggs, sponge cakes, egg whites, angel food cakes, heavy
cream, mayonnaise, boiled frostings, some candies
Dough Hook
Use to mix and knead yeast doughs:
Breads, coffee cakes, rolls, buns
MAINTENANCE
NOTE: ALL MAINTENANCE WORK SHOULD BE DONE ONLY AFTER THE UNIT HAS BEEN
DISCONNECTED FROM ELECTRICAL POWER AND GROUNDING.
• Never use a metal or stiff brush to clean the mixer. Never clean the mixer with a water hose or any
fluid pressure.
• The mixer should be thoroughly cleaned after each use.
• Bowls and agitators should be removed from the mixer and cleaned.
• The transmission case and planetary gears are filled with special lubricant that will last for several
years. When lubricant is needed for replacement, it should be ordered from our authorized service
representative.
• If the attachment strikes the bowl, stop the mixer.
• If your mixer should malfunction or fail to operate, check the following:
• Is the mixer plugged in?
• Is the fuse in the circuit to the mixer in working order? If you have a circuit breaker box, be sure
the circuit is closed.
• If the problem is not due to one of the above items, please contact your original seller.
To Next Page
Loading...
