Need help?Do you have a question about the Esu LokSound 5 DCC and is the answer not in the manual?
General| Brand | Esu |
|---|---|
| Model | LokSound 5 DCC |
| Category | Media Converter |
| Language | English |
Lists crucial safety precautions and handling advice for the LokSound decoder and its installation.
Details the default button assignments for various functions (lights, sounds, etc.) on the decoder.
Explains how to operate the decoder using a DCC system, including default address.
Introduces the fundamental concepts and possibilities of DCC programming for the decoder.
Details how to program the decoder directly on the main track using the locomotive address.
Explains the role of Configuration Variables (CVs) in customizing decoder behavior.
Explains programming via a dedicated service track, including reading CVs.
Explains how to set acceleration and deceleration times using CVs 3 and 4.
Details setting the initial starting voltage and maximum speed (CV 2, CV 5).
Provides a table for adjusting individual sound volumes using specific CVs.
Highlights the ESU LokProgrammer as an easy method for CV configuration.
Outlines the different programming modes supported by LokSound decoders.
Covers how to set primary (short) and extended (long) addresses for the decoder.
Details setting the short address (CV 1) for locomotive control.
Explains the process and settings for using longer locomotive addresses.
Explains the concept and method for programming long locomotive addresses.
Step-by-step guide to writing a long address into CVs 17 and 18.
Describes how to read a locomotive's long address from CVs 17 and 18.
Details the CV for setting the DCC/Motorola address of the locomotive.
Explains setting the minimum speed of the locomotive.
To Next Page
