Need help?Do you have a question about the Esu SignalPilot 51840 and is the answer not in the manual?
General| Brand | Esu |
|---|---|
| Model | SignalPilot 51840 |
| Category | Media Converter |
| Language | English |
Manufacturer's declaration of product compliance with EMC directive and standards.
Instructions for proper disposal of electrical and electronic equipment according to WEEE directive.
Safety and operational advice before commissioning the SignalPilot decoder.
Overview of the SignalPilot decoder's capabilities and design.
Specifications including input voltage, outputs, maximum current, operating modes, and dimensions.
List of items included with the SignalPilot decoder package.
General guidance on connecting the SignalPilot decoder before installation.
Detailed description of each terminal on the SignalPilot decoder for connections.
How to power the SignalPilot from the digital system or an external supply.
General advice on connecting loads to the SignalPilot outputs.
Wiring instructions for lamps and LEDs with different anode/cathode configurations.
How to connect and operate motorized turnout drives using the SignalPilot outputs.
How to dock the SwitchPilot Extension module to the SignalPilot.
Description of relay outputs and ABC brake sector integration.
Step-by-step guide to configuring the SignalPilot using the LokProgrammer software.
Setting the base address and introducing the Signals register.
Customizing signal aspects, including night service and random operations.
How to place, move, delete, and configure individual signals.
Detailed examples of configuring 2-aspect and 3-aspect signals.
How to change turnout numbers and assign outputs for signals.
Customizing output properties, lighting effects, fade-in/out, and delay times.
Assigning relays and using alternative output configurations.
Saving the project and transferring settings to the SignalPilot.
Recommendations for wiring, saving diagrams, and testing configurations.
Configuring distant signals and blanking based on main signal aspects.
How to program the SignalPilot using POM on the layout.
Configuring the SignalPilot using a programming track.
RailCom features and methods for resetting the decoder to factory defaults.
Guide to creating and using custom signal aspects with XML files.
Contact information for support and details on the product warranty.
Steps and fields for reporting and resolving product issues.
To Next Page
