Esu 51801 User Manual

32 pages

To Next Page

Instruction Manual

4. Edition, December 2017

P/N 04213-13564

SwitchPilot V2.0

SwitchPilot Extension V1.0

SwitchPilot V2.0

Table of Contents2
Declaration of Conformity3
WEEE Delaration4
Important Notes - Please Read this Chapter First4
How this Manual will Help You5
Introduction - the Switchpilot Family5
- Members of the Switchpilot Family5
- Switchpilot Overview5
- Switchpilot V2.05
- Switchpilot Extension6
- Features6
- Operational Modes6
- K83 Mode6
- K84 Mode6
- 3.User Mode6
- Transistor Outputs6
- Servo Outputs7
- Conventional Servos7
- Digital Servos8
- ESU Servo Motor8
- Feedback Inputs8
Connection to the Digital System8
- Connecting Elements of the Switchpilot8
- Power Supply from the Digital System9
- Separate Power Supply9
- Wiring of Transistor Outputs10
- Connecting Double-Coil Solenoids10
- Wiring Daylight Signals and Light Bulbs or Leds10
- Wiring a Servo11
- Wiring Feedback Contacts11
- Wiring the Switchpilot Extension12
- Relay Outputs12
- Wiring a Motor Drive12
- LGB® Motor Drive13
- Polarizing Electric Frogs13
Decoder Settings (Programming)14
- Changeable Decoder Settings14
- Configuration Variables (CV)14
- Standardization Regarding NMRA14
- Bits und Bytes14
- Programming with DCC Systems15
- Programming on the Programming Track15
- Connecting to the Programming Track15
- Programming on the Main Track16
- Programming with Märklin® Central Stations16
- Programming with the ESU Lokprogrammer16
Address Settings17
- Turnout Numbers17
- Decoder Address17
- Schedule of Turnout Numbers and Addresses17
- Factory Settings20
- Programming Addresses with Programming Button20
- First Address for Outputs 1 - 420
- Second Address for Outputs 5 - 620
Parameters of the Transistor Outputs20
- Configuration of Output with Variable Duration (K83)20
- Output Configuration to Pulsed Output21
- Configuration of an Output for PECO Solenoid Drives21
- Configuration for Continuous Operation (K84)21
- Configuring the „Zoom"-Effect21
Configuration of Servo End Position „B21
- Configuration of Servo Speed21
- Disabling the Pulse Signal and Power Supply22
Configuration of Servo End Position „A21
Features of Servo Outputs21
Railcom22
- How to Activate Railcom22
- How to Read out Cvs with Railcom® and ESU Ecos22
- Feedback of Turnout Position with the Ecos23
Options for Switchpilot Extension24
- Time of Switching24
- Assignment of Relays24
Decoder Reset24
- With DCC Systems24
- With Programming Button24
- With ESU Lokprogramer24
Support and Assistance25
Technical Data26
- Technical Data Switchpilot V2.026
- Technical Data Switchpilot Extension26
List of All Supported Cvs27
Warranty Certificate31

Questions and Answers:

Need help?

Do you have a question about the Esu 51801 and is the answer not in the manual?

Esu 51801 Specifications

General

Brand	Esu
Model	51801
Category	Media Converter
Language	English

Related product manuals

Esu SignalPilot 51840

32 pages

Esu SwitchPilot 3 51830

Esu LokSound micro V4.0