3
1. Declaration of conformity
We, ESU electronic solutions ulm GmbH & Co. KG, Edisonallee
29, D-89231 Neu-Ulm, Germany, declare in sole responsibility that
the product
Product description:
SwitchPilot, SwitchPilot Extension,
Part number: 51820, 51801
complies with all relevant regulations of the Directive for Electro-
magnetic Compatibility (2004/108/EG). The following harmonised
standards have been applied:
EN 55014-1:2006 + A1:2009: Electromagnetic Compatibility -
requirements for household appliances, electric tools, and similar
apparatus - Part 1: Emission - Product
EN 55014-2:1997 + A1:2001 + A2:2008: Electromagnetic Com-
patibility - Requirements for household appliances, electric tools,
and similar apparatus - Part 2: Immunity - Product family standard.
Copyright 1998 - 2017 by ESU electronic solutions ulm GmbH & Co KG. Electrical
characteristics and dimensions are subject to change without prior notice. All
rights reserved. ESU might not be held responsible for any damage or conse-
quential loss or damage chaused by inappropriate use of the product, abnormal
operating conditions, unauthorized modifications to the products etc.
Not suitable for children under 14 years of age. Inappropriate use may result in
injury due to sharp points and edges.
Märklin® and mfx® is a registered trademark of the company Gebr. Märklin®
and Cie. GmbH, Göppingen, Germany. RailCom is a registered trademark of the
company Lenz Elektronik GmbH, Giessen, Germany.
All the other trade marks are owned by their respective right holders.
ESU electronic solutions ulm GmbH & Co. KG continues to develop the products
according to the company´s politics. Therefore, ESU reserves the right to carry out
changes and improvements on the products listed in this manual at any time and
without any advanced note.
Duplications and reproductions of this documentation are strictly forbidden and
need to be allowed by ESU in writing.
11. RailCom® ............................................................. 22
11.1. How to activate RailCom® ......................................22
11.2. How to read out CVs with RailCom® and ESU ECoS 22
11.3. Feedback of turnout position with the ECoS .............23
12. Options for SwitchPilot Extension ................... 24
12.1. Time of switching .....................................................24
12.2. Assignment of Relays ................................................24
13. Decoder reset ....................................................... 24
13.1. With DCC systems ....................................................24
13.2. With programming button ........................................24
15.3. With ESU LokProgramer ............................................24
16. Support and assistance ....................................... 25
15. Technical data ....................................................... 26
15.1. Technical data SwitchPilot V2.0 ................................. 26
15.2. Technical data SwitchPilot Extension .........................26
20. List of all supported CVs...................................... 27
22. Warranty certificate ............................................. 31
To Next Page
Loading...
