Esu LokPilot 5 Basic User Manual

LokPilot 5 Basic
ESU P/N 01421-24834
P DCC / DC-Decoder with B-EMF for engines equipped with DC or coreless motors
P Four powered function outputs ( +8 logic level outputs for 21MTC version)
P RailComPlus® for automatic Registration at ESU command stations
P Supports ABC braking & versatile ESU Version 5 function mapping
ESU LLC
1304 Jordan Ave
Montoursville PA 17754
USA
ESU GmbH & Co. KG
Edisonallee 29
D - 89231 Neu-Ulm
DEUTSCHLAND
59020
LokPilot 5 Basic
DCC Decoder
NMRA 8 pin wire harness
DCC & ABC & RailComPlus
4 powered function outputs
1 logic level output (PowerPack)
4AOEGOP*fjacab+
Specification
Operational
modes
NMRA/DCC with 14, 28, 128 speed steps.
2-digit (short) and 4-digit (long) addresses.
Analog DC operation (de-selectable).
Automatic recognition of operational mode and DCC speed step selection.
Supports Lenz® LG 100 and ABCBraking sections
Throttle
Runs DC and coreless motors.
0,9 A continuous load. 10 kHz - 50,00 kHz motor pulse width frequency motor regulation.
Motor output overload protection. Back-EMF (de-selectable)
Function outputs
4 powered outputs with overload protection
250mA load per output.
500mA total load of all function outputs.
8 pin version supports 1, 21MTC version supports 8 additional logic level outputs.
Shunting speed and momentum key selectable.
Programming DCC Servicemode & DCC POM (Programming on Main).
Features RailCom® Feedback system. RailComPlus® Automatische Anmeldung.
Interface NMRA 8 pin 21MTC
dimensions in mm
dimensions
25,5 x 15,5 x 4,5
1.00 x 0.61 x 0.18
25,5 x 15,5 x 4,5
1.00 x 0.61 x 0.18
Item - Number
59020 59029
This product is not a toy. Not recommended for children under 14 years of age. WARNING: This product can
expose you to chemicals including Styrene, which is known to the State of California to cause cancer. For more information, go to www.p65warnings.ca.gov.
www.esu.euwww.esu.eu

Esu LokPilot 5 Basic Specifications

General

Brand	Esu
Model	LokPilot 5 Basic
Category	Media Converter
Language	English

Summary

General Safety Warnings

General Safety Precautions

Safety guidelines for handling and operating the decoder, avoiding moisture and physical damage.

Installation Requirements and Procedures

Pre-conversion Locomotive Checks

Ensure locomotive mechanical properties are faultless before digital conversion.

8-pin NEM 652 Interface Installation

Guide for connecting the decoder to an 8-pin NEM 652 interface.

21MTC Interface Installation

Guide for connecting the decoder to a 21MTC interface.

Installation Without Interface

Steps for locomotives without a dedicated interface.

Function Output Wiring

Guidance on connecting loads to function outputs and current limits.

Electrical Considerations and Operation

LED and Smoke Unit Wiring

Guidelines for wiring LEDs and smoke units, including resistor requirements.

Buffer Capacitor Connection

Instructions for connecting buffer capacitors to improve current pickup reliability.

PowerPack Functionality

Explanation of the PowerPack for maintaining operation during power interruptions.

DCC and DC Operation

Information on operating with DCC systems and default DC settings.

Decoder Settings and Programming

Overview of CV parameters and how to change them using a DCC command station.

Lenz ABC-Brake Mode

Details on the ABC braking technique and related CV settings.

Decoder Configuration and Parameters

RailComPlus Recognition

How RailComPlus enables automatic decoder recognition by command stations.

CV Parameter Descriptions

Detailed explanations of various CVs for controlling locomotive functions and features.

Decoder Reset Procedure

Instructions on how to reset the decoder to its default factory settings.