To Next PageTo Next Page
Need help?Do you have a question about the eta 7751 and is the answer not in the manual?
General| Movement Type | Automatic |
|---|---|
| Height | 7.9 mm |
| Jewels | 25 |
| Power Reserve | 44 hours |
| Frequency | 28, 800 vibrations per hour (4 Hz) |
| Functions | Hours, Minutes, Small Seconds, Chronograph, Day, Date |
| Diameter | 30.00 mm |
Mandatory eye protection for all interventions on the movement.
Observe legal provisions for waste handling and disposal, and prevent water pollution.
Guide to symbols used for warnings, advice, and specific information in the document.
Recommended oils and greases for lubricating the handsetting mechanism parts.
Specifies minimum torque values for loosening parts in the handsetting mechanism.
Recommended oils and greases for lubricating basic movement components.
Specifies minimum torque values for loosening parts in the basic movement.
Recommended oils and greases for lubricating automatic and chronograph mechanisms.
Precautions for handling Moebius Fixodrop FK/BS 8941, a highly volatile product.
Recommended oils and greases for lubricating calendar, moon phase, and hour counter mechanisms.
Do not wash parts; exchange dirty/rusty ones for original ETA SA pre-lubricated parts.
Steps for securing and releasing the movement when removing it from the case.
Guidelines for cleaning movement parts, specific advice for plastic and certain components.
Specific instructions for fitting the driver cannon pinion (No 49) onto its stud.
Steps for adjusting the minute counter finger and its engagement with the wheel.
Instructions for fitting watch hands onto the corresponding movement holder.
Description of pushers and indicators for various watch functions.
Time restrictions for making date, day, and moon phase corrections to prevent damage.
