3) FUNCTIONS
The appliance has three basic functions with various properties:
a) Cooling function
To cool down the air, press the cooling button B8. The activated function is indicated
by B10 icon. With this function, A8 pump is active, pumping the water from the tank to
the cooling pad A10. Switch off the function by pressing B8 button again (B10 icon will
disappear), and switch the appliance to a standard fan function.
b) Moisturising function
To moisturise the air, press B3 button. The activated function is indicated by B14 icon. In
this mode, the pump is active as well. When using this function, the speed and the blowing
mode cannot be modified. Switch off the function by pressing B3 button again (B14 icon
will disappear), and switch the appliance to a standard fan function.
c) Fan function
This is a standard ventilation function without the activated pump and with no need to
have water inside A5 tank. This is the default function when the appliance is switched on.
You may also activate it by switching off the cooling and moisturising functions. It is only
indicated by the switched on/off icon B1, and by the respective icons of speed and blowing
mode setting.
Notes and recommendations
– If you want to activate the cooling and moisturising functions, water must be present in
A5 tank. Regularly monitor the water level so as it will not drop below MIN level mark.
Do not have the appliance without any water when the pump is switched on!
– If you are going not to use the appliance for a long time, we recommend activating
3 c) fan function at the high speed for at least 20 minutes before switching off.
This will completely dry the internal components of the appliance.
4) OSCILLATION
By pressing B5 button, you activate oscillation of internal blades A2. The function
is indicated by the icon B12. Outer blades A1 must be set up manually.
5) IONIZATION
Ionization is activated and deactivated by pressing B7 button. The function is indicated by
the icon B11. With this function turned on, the passing air is ionized.
6) TIMER
With B4 timer button you may set up switching the appliance off after 8 hours at maximum.
Each press of the button will set up the timer as follows:
1H - 2H - 3H - 4H - 5H - 6H - 7H - 8H - timer off - 1H - 2H - 3H ...
GB
26 / 55
To Next Page
Loading...
Need help?
General
