EasyManua.ls Logo

Etac Clean - Page 11

Etac Clean
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Etac / Clean
16
More adjustment options are available by moving the pin.
E5
User may be grazed by the footrest supporting pin
when the footrest is removed
When the chair is adjusted to a height of 47.5 cm, the
lowest footrest position must not be used.
Back support upholstery E6-E9
User brake E10-E12
Risk of pinching at rear wheel and chassis/brake.
Service and maintenance
Clean the device using a standard non-abrasive cleaning
agent (pH between 5 and 9). Rinse and dry.
Disinfect the device with 70% disinfectant solution.
The device requires no other maintenance.
The device and its accessories can be safely cleaned at
85°C for 3 minutes (unless otherwise stated). This applies
to reconditioning.
Constituent materials are resistant to common
disinfectants.
The following surface treatment methods have been used
to protect against corrosion:
Lacquered surfaces = Polyester powder coating
Non-lacquered steel surfaces = Fe/Zn-Ni
5-year guarantee against material and manufacturing
defects.
Transport, storage and disposal
Storage
The device should be stored indoors in a dry place at a
temperature above 5°C. If the device has been stored for
a long time (more than four months), its function must be
checked by an expert before use.
Clean
Clean 24”
Clean H. adj.

Related product manuals