To Next Page
S
Steven ByrdAug 9, 2025
What to do if Etac Mobility Aid lifter does not respond to hand control?
- DDr. Rachel SpenceAug 9, 2025
If your Etac Mobility Aid lifter isn't responding to the hand control, check these potential causes: * Ensure the Emergency Stop is not activated by pushing the button back in. * The lifter's electronics may be overheated; allow it time to cool down. * Verify the hand control is properly plugged in by opening the cover and plugging it in securely. * Inspect the hand control, plug, and cord for any damage; replacement may be necessary if broken.
General
