Etac Molift Air Series User Manual (English)

Denise HarrellAug 4, 2025

What to do if Etac Mobility Aid lifter does not respond to hand control?

T
tara77Aug 4, 2025
If your Etac Mobility Aid lifter isn't responding to the hand control, check these potential causes: * Ensure the Emergency Stop is not activated by pushing the button back in. * The lifter's electronics may be overheated; allow it time to cool down. * Verify the hand control is properly plugged in by opening the cover and plugging it in securely. * Inspect the hand control, plug, and cord for any damage; replacement may be necessary if broken.

Brand	Etac
Model	Molift Air Series
Category	Mobility Aid
Language	English

Brand

Etac

Model

Molift Air Series

About Molift Air

Hoist Components

Identifies the main parts of the Molift Air hoist with a diagram.

General

Declaration of Conformity

Details CE marking and compliance with EU directives and standards.

Conditions for Use

Specifies who can use the equipment and the importance of certified installation.

Warranty

Outlines the 2-year warranty against defects in workmanship and materials.

Product Identification

Product Labels

Explains the information found on the product labels and barcodes.

Warning Labels and Symbols

Details symbols used on the product and their meanings for user safety.

Technical Data

Safe Working Load (SWL)

Specifies the maximum weight the hoist can safely lift.

Lifting Speed and Dimensions

Details hoist lifting speed and its physical measurements.

Battery and Charging Specifications

Covers battery type, voltage, capacity, and charger details.

Installation

Lifter Installation

Details the process of mounting the lifter onto the trolley.

Trolley Installation

Explains how to mount the trolley into the rail system.

Checklist After Installation

Confirms proper installation and readiness for use.

How to Use Molift Air

General Safety Precautions

Provides overarching safety rules for operating the lifter.

Daily Checks and Safe Working Load

Covers daily inspection requirements and safe working load considerations.

Hand Control Operation

Explains the function and use of the hand control unit.

Emergency Stop and Lowering

Emergency Stop

Details activation and reset procedures for the emergency stop button.

Manual Emergency Lowering

Explains how to manually lower the lifting belt in emergencies.

Electronics and Indicators

Battery and Service Indicators

Describes the function of the battery and service indicator lights.

Battery Light

Explains the battery level indicator and its behavior.

Service Light

Details the service indicator and its meaning for maintenance.

Transport and Operating Conditions

Transport and Storage

Guidelines for storing and transporting the lifter.

Operating Conditions

Specifies temperature, pressure, and humidity for operation.

Electromagnetic Compatibility (EMC)

Precautions regarding EMC and portable electronic devices.

Batteries

Battery Specifications

Provides information on the NiMH battery pack and its life expectancy.

Battery Disposal and Initial Charging

Instructions for proper battery disposal and initial charging cycles.

Charging

Charging Through Hand Control

Details charging via the wall-mounted battery charger.

IRC - In Rail Charging

Explains continuous charging through the rail system.

Charger Light Indicators

Describes the meanings of different charger light indications.

Transfer Operations

Planning and Safety

Emphasizes planning for safe and smooth lifting operations.

Using Slings

Guidance on selecting and correctly fitting slings.

Lifting and Lowering Technique

Instructions for safe lifting and lowering of users.

Angle Sensor Function

Explains the angle sensor preventing lifting at steep angles.

Accessories

Suspensions

Lists available 2-point and 4-point aluminum suspension options.

Scale

Details the Molift Scale Set and its BMI calculation feature.

Slings

Describes the Molift RgoSling series and available sizes/types.

Maintenance

Cleaning and Disinfection

Provides instructions for cleaning and disinfecting the lifter.

Reconditioning

Outlines steps for reconditioning based on inspection.

Recycling and Spare Parts

Information on product disposal and ordering spare parts.

Periodic Inspection

Details the schedule, scope, and procedure for periodic inspections.

Troubleshooting

Lifter Not Responding to Hand Control

Addresses issues where the lifter does not respond to the hand control.

Lifting Band Moves Upwards

Explains causes and solutions when the lifting band moves upwards during lowering.

Etac Molift Air Series User Manual

Table of Contents

Questions and Answers:

Etac Molift Air Series Specifications

Summary