Back cover
• Place the back cover far enough back
on the seat for a fold to be formed
between the backrest and seat.
• It is important to always place the
back cover on the seat in this way, as it
affects user comfort when seated.
Footrests
• Adjust the height until you are sure
that your feet are supported and your
thighs are resting on the cushion.
• Adjust the footrest angle, so the ankles
are at 90°.
• Loosen the lock nut (A) on the legrest
fully. Remove the screw (B).
Adjust the height. Replace the screw
and nut and tighten securely.
Seat cushion
• Place the cushion far enough back on
the seat that the rounded corners are
between the back tubes.
• Trim the cushion to suit seat depth.
• Place any comfort wedge in the pocket
of the cover under the cushion.
Calf/Heel strap
• Adjust the length so that your
insteps rest on the footrests.
3
A
B
To Next Page
