Etac Cross - Handling and Transport Procedures; Folding, Unfolding, and Lifting; Vehicle Transportation and Securing

Back upholstery
• Loosen all back straps.
• Tighten the strap just below the curve
of the back.
• Adjust the other straps to allow space
for the bottom and follow the natural
curve of the back.
Armrest
• The high position of the armrests
supports and relieves pressure on the
back better than a lower position.
Backrest angle
• The backrest angle may need to be
adjusted when adjusting the shape
of the back upholstery.
Comfort
• Good comfort when seated requires
a well-shaped seat that provides:
- Pressure distribution.
- Stability.
- Freedom of movement.
4
• Slide the side plate up or down to the
required height.
• Reattach the screw to the side plate.