Why is my Etac Wheelchair pulling diagonally?
If your Etac Wheelchair is pulling diagonally, consider the following solutions: * Pump up the tires. * Adjust the angle of the front fork mountings. * Check that the front fork mountings are fitted at the same height. * Check the rear wheel mountings, as they may be incorrectly fitted. * Ensure the user’s weight is evenly distributed. * Examine if the front handrim is stronger on one side.
What to do if my Etac Cross Wheelchair is heavy to maneuver?
If your Etac Wheelchair feels heavy to maneuver, try the following: 1. Pump up the tires. 2. Check the rear wheel mountings, as they may be incorrectly fitted. 3. Clean any hair and dirt from the castor axles. 4. Adjust the chair’s balance position, as there may be too much weight over the castors.
Why is my Etac Cross awkward to turn?
If your Etac Wheelchair is awkward to turn, consider these solutions: * Ensure the tires are properly inflated. * Check that the front forks are not tightened too much. * Clean any hair and dirt from the castor axles. * Adjust the chair’s balance position if there is too much weight over the castors.
What to do if the brakes on my Etac Cross are poor?
If the brakes on your Etac Wheelchair are not performing well, try these solutions: * Pump up the tires. * Adjust the distance between the tire and the brake.
How to fix loose rear wheels on Etac Cross Wheelchair?
If the rear wheels of your Etac Wheelchair feel loose, check that the washer around the hub axle is still in place and adjust the hub axle length.
What to do if rear wheels are difficult to get on/off Etac Cross?
If you're having trouble getting the rear wheels on or off your Etac Wheelchair, try lubricating and cleaning the quick release mechanism with cycle oil or a similar lubricant. Also, consider adjusting the hub axle length.
Why do the castors on my Etac Cross Wheelchair wobble?
If the castors on your Etac Wheelchair are wobbling, consider the following: * Ensure the front forks have been tightened sufficiently. * Verify that the front fork mountings are fitted at the same height. * Adjust the angle of the front fork mountings. * Adjust the chair’s balance position if there is too much weight over the castors.
Why is my Etac Wheelchair difficult to fold up/unfold?
If your Etac Wheelchair is difficult to fold or unfold, it might be because the upholstery is too taut. Another reason might be that the cross elements under the seat need lubrication and cleaning.
Why does my Etac Wheelchair feel unsteady?
If your Etac Wheelchair feels unsteady, make sure to pump up the tires. Also, check that all screws and controls are properly tightened.
Why is my Etac Wheelchair heavy to maneuver?
If your Etac Wheelchair feels heavy to maneuver, consider the following: * Ensure the tires are properly inflated. * Verify the rear wheel mountings are correctly fitted. * Clean any hair and dirt from the castor axles. * Adjust the chair’s balance position if there's too much weight over the castors.
Explains the purpose and use of anti-tip devices to prevent tipping.
Instructions for folding, unfolding, and safely lifting the wheelchair.
Advice on safely transporting the wheelchair in vehicles and securing it.
Important warnings related to positioning belts and collision safety.
Guidance on mounting anti-tip devices and headrests.
Adjusting rear wheel height and performing brake adjustments.
Adjusting the height and angle of the Model 2 backrest.
Adjusting back support angle for mono-, bi-, and triangular backs.
Techniques for driving over kerbs and thresholds, both up and down.
Guidance for driving on inclines and navigating stairs safely.
A fault-finding chart to diagnose and resolve common wheelchair problems.
General| Brand | Etac |
|---|---|
| Model | Cross |
| Category | Wheelchair |
| Language | English |
To Next Page
