16
Bear in mind the risk of
tipping, always adjust
the setting of the anti-
tips.
(!) If the seat angle is changed:
- Adjust the angle of the front
fork attachments.
- Also check the angle of the
backrest.
6 Settings seat
Seat height rear
Seat height front
Seat depth
Functional seat depth
6:10 Seat angle
The seat angle is dependent on
the difference between the front
and the rear seat heights. Cross
can also be set with a seat that is
angled forwards.
For max. angle of the chair, see
“The chairs possibilities”.
6:11 Seat depth with adjustable seat upholstery
The seat depth can be adjusted
(Also see “The chairs possibili-
ties”) by lifting the front seat up-
holstery and sliding it backwards
or forwards.
With Cross backrest 3A
triangular, the seat depth can be
further adjusted by means of the
lumbar angle (see the settings
section for Cross backrest 3A).
(!) The functional seat depth is
dependent on the setting of
the back upholstery. It can be
upto 6 cm longer than stated
seat depth measured from the
seat tube.
To Next Page
Loading...
