35
The anti-tip consists of two parts:
- The attachment bar is mounted
under the wheel mount (see
illus).
- The anti-tip bar is mounted a
the desired height (see illus).
11 Assembly instructions accessories
3-7 cm
To allow you to negotiate thres-
holds and the edges of thick
carpets, a distance of 3-7 cm from
floor level is recommended.
Tools: 5 mm Allen key
After adjusting the seat
height, centre of bal-
ance or backrest angle,
always ensure that you
check the function of
the anti-tip.
3-7 cm
Telescopic anti-tips can be adjust-
ed in length and angle by pressing
in the snap-lock pin.
11:6 Anti-tip, mounting
Check the balance of
the wheelchair when
the user leans against
the headrest.
We recommend the use
of anti-tips.
11:7 Headrest
The headrest is mounted onto the
bow handle (accessory, see point
8:6). The headrest is adjustable in
height, depth and angle, and is
detachable. Assembly instructions
are supplied with the headrest.
(!) Before the headrest is adjust-
ed, ensure that the user has a
good, secure sitting posture.
To Next Page
Loading...
