Need help?Do you have a question about the ETAS ES585.1 and is the answer not in the manual?
General| Brand | ETAS |
|---|---|
| Model | ES585.1 |
| Category | Control Unit |
| Language | English |
Details key functions like K-Line support, protocols used, and galvanic isolation of the ES585.1.
Outlines the ES585.1's applications including data acquisition, ECU variable calibration, and flash programming.
Covers operating temperature, compact design, vehicle use suitability, and INCA integration.
Specifies hardware, supported software, and necessary ECU protocols for proper ES585.1 operation.
Illustrates the ES585.1's internal components and describes its compact, stable metal housing.
Details the PC Printer Interface (Centronics), ECU Interface, Analog Output, and Display Element.
Explains the ES585.1 power supply requirements and its automatic power-on functionality.
Details connecting the ES585.1 to the PC printer interface and the ECU via K-Line.
Outlines the process for updating the ES585.1 firmware using service software (HSP).
Describes the K-Line interface, ISO 9141-2 standard, transfer rate, and communication protocols.
Explains data transfer modes (Byte, Nibble) via the Centronics interface for PC communication.
Provides pin assignment details for both the PC Printer Interface and the ECU K-Line Interface.
Covers general device information, mechanical dimensions, weight, and environmental conditions.
Details power supply, ECU interface (K-Line), printer interface, and analog output specifications.
Details the Cable Adapter KA45, including signal assignments, plug color, labeling, and order number.
Provides order details for K-Line Interface Cables K78, K96, and CBK100-1m5, including lengths and order numbers.
Provides order details for Cable Adapter KA18 and Cable Adapter K72, including lengths and order numbers.
Lists the order name, short name, and order number for the ES585.1 unit itself.
Lists order names, short names, and order numbers for various available cables and adapters.
To Next Page
