Introduction6
as ThermoScan, AD-Scan or Lambda Meter, can be connected using the serial
measuring bus. This means the ES590 can be used for a wide range of measur-
ing and calibration tasks.
Fig. 1-2 ES590 Module Rear View
All ETK interfaces are supported up to the fast 100 MBit transfer in block mode
in which you can work with up to 16 acquisition rates. Depending on the num-
ber of rates used, a large number of variables can be integrated in the
extended address space, which means very complex tasks can be processed.
A fast data acquisition controller and the 16 MB data memory, which is man-
aged dynamically, ensure the real-time capable support of these tasks.
Calibration can take place on the K-Line using KWP2000 and MCMess; the
CAN interface supports the protocols CCP and Keyword-on-CAN in addition to
CAN Monitoring.
HOST
ON
AUTO
SERIAL
CBP 120-2
CBE 100
6-32V
serial interface
To Next Page
Loading...