Need help?Do you have a question about the ETAS XETK-V2.0 Series and is the answer not in the manual?
General| Storage Temperature | -40°C to +85°C |
|---|---|
| Supported Interfaces | CAN, LIN, FlexRay, Ethernet |
| Data Transfer Rate | Up to 100 Mbps |
| Supported Protocols | CAN, FlexRay, Ethernet |
| Synchronization | Yes |
| Power Supply | External |
| Application | ECU Development, Calibration, and Measurement |
| Operating Temperature | -20°C to +70°C |
| Temperature Range | -20°C to +70°C |
Advises observing safety notices to avoid health issues or device damage.
Specifies qualifications and duties for safe product operation.
Describes the connectors and interfaces used for ECU communication.
Details the power supply requirements and monitoring for the XETK-V2.0.
Covers the Nexus (JTAG) debug interface for microcontrollers.
Details the physical connection of the XETK-V2.0 to the ECU.
Provides information on how to connect the XETK-V2.0 using various cables.
Lists supported microcontrollers and required software versions for compatibility.
Details the pin assignments for the XETK-V2.0A/C VertiCal connector.
To Next Page
