4-20mA Menu - eSelect M
From main screen select OK and using the right arrow
Keep scrolling until screen on the right is shown.
Press the OK button x 2 to select either Dosing
Setpoint or mA device. Dosing setpoint is the
recommended option. Confirm with OK and then press
the right arrow to move to next screen.
Setpoint Value should now be shown so adjust to
match the current setpoint for the channel and confirm
with OK
Press the right arrow to move to next screen and
adjust Working Mode to either Acid or Alkaline. Confirm
with OK button and use right arrow to move to next
screen.
To Next Page
Loading...
