General safety hints for work with electric tools
Dear Customer!
Please read and take note of the following comments that regard you protection against electrical shock
and risk of injury and fire.
§ Verify that the power supply in your area is compatible with the voltage listed on machine.
§ Connect the power lead to the mains only with the tool turned off.
§ Always turn on the tool before setting it against the piece you are working on.
§ Adopt protective measures against electric shock. Avoid bodily contact with earthen parts, such as metal
pipes, radiators, cooking ranges, refrigerators and the like.
§ Large variations in temperature can lead to condensation inside. Before use: Give the machine time to
adjust to the temperature of work area.
§ Do not use machines, attachments and chargers for other works than those that they are designed for!
§ Secure the work-piece. Use clamping devices or a vise to hold the work-piece securely.
§ To avoid accidents, do not wear jewelry or loose clothing that could be caught up by moving parts. For
outdoor use, it is recommended to wear protective footwear. Long hair should be tired up.
§ When dust splinters or shavings become a problem while working, please wear protective eyewear and
if necessary a protective mask.
§ Wear ear protection.
§ Be sure you always having sure footing, especially when working on ladders and scaffolding.
§ Keep electric tools away from humidity and rain. Do not immerse.
§ When working outdoors, only use approved tools and extension cables marked for outdoor use.
§ Do not use the equipment in areas where the danger of explosion exists.
§ When passing this device over to a third person, these instructions must be handed out too.
§ Only have repairs done by specialists using original parts.
§ WARNING: Some situations, such as the consumption of alcohol, medication or drugs, plus states of
illness, fever or fatigue, will affect your ability of reaction. Do not use electric tools in any of these
situations.
§ Keep electric tools away from children.
§ Store electric tools in the original box in a safe place and cut of the reach of children.
§ When not in use, during breaks, packing up, changing accessories of during repair always unplugs the
cable or remove the batteries from the tool.
§ Never carry the tool by the cable. Never unplug the tool by pulling on the cable.
§ When working: Do not allow the motor to stall under the load.
§ Keep your workplace tidy: Untidiness can cause accidents!
§ Avoid abnormal body postures while working.
§ Avoid switching on or starting up the machine unintentionally.
§ Do not leave keys, spanners and adjusting tools inserted in the machine.
Safety hints for work with mitre saw
§ Do not expose the machine to rain or damp.
§ Check that the machine is in a fault-free condition before use.
§ Do not use saw blades of high-alloy high-speed steel (HSS).
§ Do not use saw blades with characteristics that do not comply with those specified in these instructions
for Use.
§ Make sure that all the moving parts of the saw-blade safety equipment function without sticking.
§ Use only sharp, undamaged saw blades and suitable accessories.
§ Clamp work-pieces firmly before machining.
2
To Next Page
Loading...