Need help?Do you have a question about the ETCR 4000A and is the answer not in the manual?
General| Product Name | ETCR 4000A |
|---|---|
| Type | Clamp Meter |
| Clamp Size | 55mm |
| Display | LCD |
| Operating Temperature | -10°C to 50°C |
| Operating Humidity | ≤80%RH |
| Storage Humidity | ≤70%RH |
| Safety Regulations | IEC61010-1, CAT III 600V |
| Data Hold | Yes |
| Frequency Range | 50Hz/60Hz |
| Resolution | 0.1A |
| Storage Temperature | -10°C to 60°C |
| Insulation Strength | AC 3700V/1min |
Crucial safety rules and warnings for operating the instrument to prevent risks.
Specifies environmental and signal conditions for accurate instrument measurements.
Outlines general technical parameters of the instrument, including display and measurement ranges.
Details the accuracy and performance metrics under base conditions.
Instructions for powering the device and adjusting screen backlight.
Covers locking, accessing, and deleting stored measurement data.
Procedure for transferring stored data to a computer via USB-RS232.
Guidelines for performing measurements, including connection diagrams.
To Next Page
