ETC Service Note
Congo™ jr MIDI, Phone and Macro Test
Congo™ jr MIDI, Phone and Macro Test Page 6 of 6 Electronic Theatre Controls, Inc.
Step 8: Select File -> New Task (run)
Step 9: Type “test2” in the text field, then click the “OK” button]
Step 10: The following window will pop up:
Step 11: Watch for the 2 LEDS to flash on the Remote Macro Test Board
Step 12: Press the 4 buttons on the LED Remote Macro Test Board (if present), look for
“ACTIVE” on -the screen
Step 13: Look for MIDI IN messages of 32 and 33 repeating
Step 14: Press all 12 buttons on the phone individually and look for corresponding numbers on
the screen
Step 15: Close the command window
Step 16: Shut the console down.
To Next Page
Loading...