Eternico AET-KSB3003CSS - Page 7

7ENGLISH
Turning the keyboard on/off
Turn the power switch at the bottom of the keyboard to ON to turn the keyboard on.
When you are finished using the keyboard, turn the power switch at the bottom of the key-
board to OFF to turn the keyboard off.
Inserting the battery
Insert 2x AAA battery into the keyboard battery compartment to use the keyboard.
When the low battery light flashes, replace the battery with a new one.
Connecting the keyboard
The keyboard can be connected todevices via USB, Bluetooth 1 or Bluetooth 2. It is therefore
possible to connect the keyboard to up to three different devices.
USB connection
Remove the USB receiver from the bottom of the keyboard andinsert it into your comput-
er's USB-A port. The system will automatically install the drivers and thekeyboard will be ready
for use.
Bluetooth connection
Long press the Fn+
/Fn+ keys until the selected Bluetooth connection key flashes. Search
for new Bluetooth devices on your computer. Click to select the keyboard andthe keyboard
will pair with thecomputer. After successful pairing, the Bluetooth connection key stops flash-
ing.
INSTRUCTIONS