21
Remove the plug lead before carrying out any work under the cutting deck.
PAGE ITEM BEFORE AFTER THE FIRST EVERY 50 PERIODICALLY COMMENTS
EVERY CUT 25 HOURS HOURS
18 Oil Check level Oil change * Essential for the warranty
19 Spark plug Replace Clean / adjust Replace every 100 hours
18 Air filter Check condition Clean Clean or replace Check more often in very
dusty conditions
19 Cooling system Check and clean
Fuel tank and/or filter Check and clean
Fuel hose Check every 2 years,
replace if necessary
18 Coupling washer Check condition Replace after strong
schock
Drive clutch Clean and check the Maintain perfectly clean
(PBTS-PHTS-PHTB) cable adjustment
18 Blade Check condition
Replace after strong schock
19 Cables Check condition
Screws Check tightness
The best maintenance is regular cleaning after each mowing (cutting deck, wheels, engine, cutting heights, transmission system,…).
(*) every 25 hours if the motor is used under tough conditions (dust committee to commit heavy loads).
11• REGULAR MAINTENANCE SUMMARY TABLE
To Next Page
Loading...
