KL8-3
5
It will add 1 hour when pressing “ ”each time，and the hours could be added the continually
when pressing the “ ” without stop。The adjustment range is 0~23。When you set up well of the start
time , you could go on to the next step。
1） Close of Preheat setting
2） Setting Start Time of Preheat
3） Setting Continual time of Preheat
4） Setting Temprature of Preheat
5）
the setting will
be finished
3）、Press“ ” to continual working time setting of Preheat， it will show the minimum continue time
is 5 minutes on the LCD， and this time will not flash。 It will add 5 minutes by pressing “ ” each
time，And add 1 hour by pressing “ ”each time。please note that the maximum of continual time is
19 hours and 55 minutes。 When you set up well of the continual time , you could go on to the next step。
4）、Press “ ”to set setting temprature of Preheat。It will add 1℃ when pressing “ ” and
the temperature could be added continually till 45℃ when pressing the “ ”without stop。At this
time ， when pressing “ ” angin，and the temperature could return 15℃ 。The range of adjustment
is
15~45℃
5）、When everything is setting well，Press “ ”，the system will quit the Preheat setting status with
save。
*** Notice ***
1、 all setting of pre-heating must be in Power OFF status, just connect the spa with
To Next Page
Loading...