Ethnicraft CIRCLE DINING TABLE - User Manual

IN YOUR PACKAGE :
ASSEMBLY INSTRUCTION
HARDWARE ( AS LISTED ABOVE)
CIRCLE DINING TABLE
ASSEMBLY INSTRUCTION FOR DINING TABLE INSTALLATION
PARTS TO BE INSTALLED
1. TOP PANEL 1pc
2. LEG 1 set
L KEY
( included in package )
SYMBOLS
HARDWARES
NOTICE
X2
SMB NA SELYINSTRUC TIO
X
DIRECTION NUMBER OF
PERSONS NEEDED
USE L KEY
TO TIGHTEN
(1X)
Ø 6 x 10 cm
JCBC SCREW
TOOLS
RUBBER HAMMER
( Not included in package )
USE RUBBER
HAMMER
USE HAND
(6X)
Ø 6 x 7 cm
JCBC SCREW
2
2
3
3
1
1
321
- ALWAYS REFER TO HOLE POSITION & STICKER
1/3

Summary

Hardware and Tools

Hardware Components

Lists the screws and their quantities used in the assembly process.

Tools Required

Lists the tools needed for assembly, including included and not included items.

Package Contents

Lists the main components provided in the package for assembly.

Assembly Notices and Symbols

Explains symbols and provides important notices for the assembly process.

Connecting Legs

Connecting Legs #1 & #2

Describes how to connect the first two legs, ensuring surfaces are flush.

Connecting Leg #3

Details the process of connecting the third leg, ensuring proper orientation.

Locking the Legs

Illustrates the step for locking the assembled legs together securely.

Installing Table Top and Finalizing

Installing Legs to Table Top

Shows how to attach the assembled leg structure to the table top using screws.

Final Tightening

Instructs to tighten all screws once the assembly is complete and in position.

Ethnicraft CIRCLE DINING TABLE Specifications

General

Material	Solid oak wood
Shape	Round
Diameter	140 cm
Finish	Natural oil
Assembly	Required