eTIGER ES-CAM2A - Specifications and Safety; Technical Specifications; Safety Guidelines

12
Specications
- Image sensor: 1/3” CMOS
- Sensor resolution: 1600x1200 CMOS
- Video resolution up to 1280x720p (H.264)
- Photo resolution up to 1280x720px (JPEG)
- Focal: 3mm, Aperture: F2.0
- 8 infrared LEDs for night vision
- Vision scope: Horizontal: 90° / Vertical: 45° / Diagonal: 78°
- Shutter speed: 1/5 – 1/16000 sec.
- Refresh frequency : up to 25 pictures/sec.
- Wi-Fi: IEEE 802.11 b/g/n
- Built-in microphone, noise reduction
- Power supply: 5V 1A, 110~240V/ DC Jack
- Compatible with smartphones under iOS 5.0 (or higher) and Android / Tablets /
PC / Mac
Safety instructions
- Do not point the camera directly at the sun to prevent damaging the image sensor.
- Keep the camera away from heat to avoid electric shocks.
- Keep the camera away from rain or moisture.
- Do not attempt to open, dismantle, repair, or service the camera. Doing so may
cause electric shocks and other hazards.
- Any evidence of misuse, abuse, or tampering will void the Warranty.
- To maintain compliance with FCC’s RF exposure guidelines, this equipment
should be installed and operated with minimum distance of 20 cm between the
radiator and your body. Use only the supplied antenna.